loading...

How to Rubber Tree Tapping and Tapping Time Right

Posted by

When was the rubber tree sap Ready On Tapping rubber?

Tapping rubber trees ready for tapping the tree when ripe. Mature tree tapping achieved if the latex has been able to be taken without causing disruption to the growth and health of plants. The ability of plants to be tapped can be determined based on "age and girth".
Diameter for trees worth tapping at least 45 cm measured 100 cm of engagement with the circulation of at least 7 mm thick skin and these plants must be healthy. Rubber tree can be tapped usually after the age of 5-6 years. Increasing age of the plant increase the production of latex (Santosa, 2007).
From the age of 16 years can be said to be stable latex production after the age of 26 years while production will decline.



Tapping is done by cutting the rubber tree bark to the cambium limit using a tapping knife. If tapping is too deep to harm the health of plants, and also to accelerate wound healing incision it is expected that leads not touching wood (xylem) but most in 1.5 mm before the cambium (Radjam, 2009).
Lead is done by cutting the bark from top left to bottom right with a slope angle of 30˚ horizontal by using a V-shaped blade tapping deeper the leads will produce a lot of latex. In the process of tapping incision needs to be done. Wedge shape in the form of small channels, circular rod obliquity downward .. Through this incision channel will flow latex for 1-2 hours. After the latex will coagulate. The flowing latex accommodated into an aluminum bowl hung on tapping the bottom of the field. After this is done leads, the latex flows through the channel V earlier and trickled down the perpendicular accommodated with a container (Anwar, 2001).

The best time to tap rubber

Tapping good time is hours 5:00 to 7:30 am with the rationale:
The amount of latex that comes out and the latex flow rate is affected by cell turgor pressure
Turgor pressure reaches its maximum at the time of dawn, then decreases as the day wore on
Implementation of tapping can be done well when it was already quite light
(Nazaruddin and Paimin, 1998).

Signs of the garden began to be tapped is the average age of 6 years or 55% of the area of ​​one hectare has reached girth 45 cm up to 50 cm. Bugged ago 1 day or 2 days half the girth, premises leads system / formula S2 or S2-D2-D3 day (Maryadi, 2005).

Tapping the exposure time is 2 times a year, namely, on (a) the beginning of the rainy season (June) and (b) the beginning of the intensification leads (in October). Therefore, it does not automatically crop is ripe and then tapping directly tapped, but should wait for the above-mentioned time arrives (Anwar, 2001).

Tapping rubber trees ready for tapping the tree when ripe. Mature tree tapping achieved if the latex has been able to be taken without causing disruption to the growth and health of plants. The ability of plants to be tapped can be determined based on "age and girth". Diameter for trees worth tapping at least 45 cm measured 100 cm of engagement with the circulation of at least 7 mm thick skin and these plants must be healthy. Rubber tree can be tapped usually after the age of 5-6 years. Increasing age of the plant increase the production of latex. From the age of 16 years can be said to be stable latex production after the age of 26 years while production will decline (Santosa, 2007).

Tapping is done by cutting the rubber tree bark to the cambium limit using a tapping knife. If tapping is too deep to harm the health of plants, and also to accelerate wound healing incision it is expected that leads not touching wood (xylem) but most in 1.5 mm before the cambium (Aidi and Daslin, 1995).

Lead is done by cutting the bark from top left to bottom right with a slope angle of 30˚ horizontal by using a V-shaped blade tapping deeper the leads will produce a lot of latex. In the process of tapping incision needs to be done. Wedge shape in the form of small channels, circular rod obliquity downward .. Through this incision channel will flow latex for 1-2 hours. After the latex will coagulate. The flowing latex accommodated into an aluminum bowl hung on tapping the bottom of the field. After this is done leads, the latex flows through the channel V earlier and trickled down the perpendicular accommodated with a container (Maryadi, 2005).

Latex is a milky sap of many plants that freeze when exposed to air. This is a complex emulsion containing protein, alkaloids, starch, sugar, oil, tannins, resins, and gums. At many plants latex is usually white, but some are yellow, orange, or red to obtain good results tapping, tapping must follow certain rules in order to obtain a high yield, profitable, and sustainable with fixed memperhatiakan plant health factors that can crop produce optimally and for a long time (Siregar, 1995).

In practice for the continuity of production, very basic stuff is in the recovery tapping the field. So that the field can recover tapping of course there are dipelukan in penyadapanya. Avoiding the use of Ethepon the drought hit the tree tapping grooves adalahsalah a way that SADP field can recover and drought tree tapping grooves need to be given extra fertilizer to accelerate the recovery of the skin (Santosa, 2007)

loading...

FOLLOW and JOIN to Get Update!

Social Media Widget SM Widgets




Peternakan dan Herbal Updated at: 14:19

0 komentar:

Post a Comment

Copyright@2014-2016. www.AgrobisnisInfo.com . Powered by Blogger.